MN Lubes - AMSOIL Synthetic 2-Cycle Oils

AMSOIL Synthetic 2-Cycle Oils

(Scroll down the page for product info)

INTERCEPTOR™ High Performance Synthetic 2-Cycle Oil (AIT)

You will be transferred to the Amsoil online store where you can price and purchase this as well as other Amsoil items at your leisure.

INTERCEPTOR™ High Performance Synthetic 2-Cycle Oil (AIT)
Product Code: AITQT-EA
A high-performance two-cycle oil with a performance emphasis on exhaust power valves. Excellent for all types of snowmobiles, motorcycles, personal watercraft, ATVs and jet boats. Contains high levels of detergent additives to prevent valve sticking. High quality replacement for manufacturer branded oils. Injector use or 50:1 premix. JASO FC, API TC

Helps prevents hard carbon deposits that cause exhaust power valve sticking and ring sticking.
Superior lubricity controls cylinder, piston and bearing wear.
Reduces smoke and odor associated with two-cycle engines.
Helps prevent plug fouling.
Provides exceptional SAE #4 cold temperature fluidity (-58°F pour point).
Versatile and excellent for all types of recreational equipment.
Protects against rust.
Helps prevent pre-detonation from combustion chamber "hot spots."

DOMINATOR® Synthetic 2-Cycle Racing Oil (TDR)
Product Code: TDRQT-EA
DOMINATOR®, an AMSOIL exclusive formulation, lubricates and protects high performance two-cycle motors, both on and off the track. High performance motors, particularly those that are modified, operate hotter and at higher RPMs than recreational motors, and they need good oil for peak performance. DOMINATOR is engineered for racing. It has the right film strength and clean burning properties for “on the edge” operation. JASO FC, API TC
* Not suitable for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short-term use where motors are periodically inspected.

Provides excellent film strength for high heat, high RPM motors
Reduces friction for maximum power
Recommended for use with coated or non-coated racing pistons
Recommended for use with exhaust power valves
Recommended for use with high octane racing gas
Burns clean; Prevents ring sticking and plug fouling
Provides excellent protection at 50:1 pre-mix or in injection system

hp Injector Synthetic 2-Cycle Oil (HPI)
Product Code: HPIQT-EA
Excellent for all outboard motors with a performance emphasis on modern direct fuel injected (DFI) technology. Also recommended for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Injector use or 50:1 premix.
NMMA TC-W3, API TC

Superior performance in DFI outboard motors
Reduces piston and combustion chamber deposits
Protects against "ring jacking" common to DFI outboards
Low smoke, low odor product
Contains up to 30 percent more additives for "super clean" operation
Reduces wear for long engine life
Protects against rust
Multi-functional and recommended for use in many two-cycle motors
Low aquatic toxicity
Recommended for use as injection oil or at a 50:1 pre-mix

Saber™ Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
Product Code: ATPPK-EA
AMSOIL Saber™ Professional (ATP) is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness properties to control friction and help prevent wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973. ISO-L-EGD, JASO FD, API TC

Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is available in a 3.5- oz. bilingual (English/Spanish) container which is ideal for treating the 2 – 2.5-gallon cans of gas commonly used for storing mixed gas on the job. Saber Professional is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high-temperature detergent additives to help prevent hard carbon deposits from forming in these hot-operating motors. Saber Professional is “smokeless” and delivers fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FD or API TC is specified.

Saber™ Outboard Synthetic 2-Cycle Oil (ATO)
Product Code: ATOBC-EA
AMSOIL Saber Outboard is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness properties to control friction and help prevent wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973. TC-W3, API TC

Saber Outboard (ATO) is specifically designed for outboard motors. It is also very good for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Saber Outboard contains a heavy dose of lower temperature dispersant additives that excel at reducing varnish and carbon deposit formation in water-cooled motors. Saber Outboard is a very low smoke, low odor, low toxicity product that produces fewer emissions at 100:1 mix ratios than oils mixed at 50:1. It is formulated to prevent “oil loading” and plug fouling for rapid throttle response, making it ideal for trolling motors. Operators and the environment benefit from the use of Saber Outboard. It is recommended for pre-mix use where TC-W3 or API TC is specified.